服務咨詢熱線:
0769-82985559開關電源的安規X電容設計準則:
參考AD1043的設計:
1.市電輸入L/N線對大地:(2顆222/250VY2)
2.市電經過1級共模扼流圈后的兩線對大地:(2顆472/250VY2)
參考MWS-145-12的設計:
1.市電經過1級共模扼流圈后的兩線對大地:(2顆222/2kVY1)
2.整流橋輸出的低壓端(變壓器初級低壓端)對大地:(1顆222/2kVY1)
3.12V低壓直流輸出GND對大地:(1顆103/1KVY1)
參考MWS-200-12的設計:
1.市電輸入L/N線對大地:(2顆472/250VY2未上)
2.市電經過1級共模扼流圈后的兩線對大地:(2顆472/250VY2)
2.整流橋輸出的低壓端(變壓器初級低壓端)對大地:(1顆222/250VY2)
3.PFC輸出高壓端對變壓器初級地:(1顆103/2kVY1)
4.12V低壓直流輸出對大地:(1顆103/1KVY1)
5.12V低壓直流輸出GND對大地:(1顆203/1KVY1)
參考康殊電子的設計:
1.市電輸入L/N線對大地:(2顆102/250VY2)
2.市電經過2級共模扼流圈后的兩線對大地:(2顆102/250VY2)
3.整流橋輸出的低壓端(變壓器初級低壓端)對大地:(1顆332/250VY2)
4.12V低壓直流輸出對大地:(1顆223/1KVDISCY1)
5.變壓器初級低壓端對變壓器次級低壓端:(222/250VY1)
參考AD1118安規X電容放置原則:
1.共模扼流圈前:105/275VAC(MKP/X2)
2.共模扼流圈后:474/275VAC(MKP/X2)
參考MWSP200-12安規X電容放置原則:
1.共模扼流圈前:1uF/275VAC(MKP/X2)
2.共模扼流圈后:0.33uF/275VAC(MKP/X2)
參考MWS145-12安規X電容放置原則:
1.共模扼流圈前:0.22uF/MKP-X2-250VAC/275VAC(GS-L)
2.共模扼流圈后:0.1uF/MKP-X2-250VAC/275VAC(GS-L)
一般兩級安規X電容,前一級用0.47uF,第二級用0.1uF;單級則用0.47uF.目前還沒有比較方便的計算方法。(電容容量的大小和電源的功率無直接關系)
開關電源的安規Y電容設計準則:
大地=PGND(orCHGND)
參考AD1118安規Y電容放置原則:
1.市電輸入L/N線對大地:(2顆472/250VY2)
2.市電經過一級共模扼流圈后的兩線對大地:(2顆472/250V)
3.整流橋輸出的低壓端(變壓器初級低壓端)對大地:(1顆222/250V)
4.6組低壓直流輸出88V1對大地:(各1顆103/1KVY1)
5.6組低壓輸出輔助電源AGND(變壓器次級低壓端)對大地:(共用1顆103/1KVY1)
6.變壓器初級低壓端對變壓器次級低壓端:(共用1顆103/1kVY1)
根據上述說明,安規Y電容設計規則如下:(可適當選擇)
1.市電輸入L/N線對大地:(2顆222/250VY2)
2.市電經過一級共模扼流圈后的兩線對大地:(2顆222/250VY2)
3.整流橋輸出的低壓端(變壓器初級低壓端)對大地:(1顆222/250VY2)
4.變壓器初級低壓端對變壓器次級低壓端:(共用1顆103/1kVY1)
5.低壓側直流輸出對大地:(1顆103/1KV)
6.低壓輸出側GND對大地:(1顆103/1KV)
安規電容